Hydraulic Patient Transport Stretcher
B-2 luxury hydraulic stretcher is widely used in hospital for patient transfer. It applies two hydraulic pumps, which allows for easy adjustment of height, trendelenburg and reverse trendelenburg. One ABS crank at the foot end connected with one lead screw, by rotating the crank, the knee rest could be adjusted to maximum 40 degrees. The back rest could be also adjusted to maximum 70 degrees by pushing the metal pull rod under the back rest at the head end, which were connected with two gas-springs. 5-bar aluminum alloy side rails at each side increase the security of patient. There are handles at both head and foot end, convenient for medical staff to move the carts.
1. Dimension 213×75×52~82cm
2. Two separate hydraulic pump, height and (reverse) trendelenburg position adjustable.
3. Back section panel and Leg section panel are adjustable, Backrest plate could be exposed through X-ray.
4. Central locking brake, diameter 150mm, 6 inch, match with guide wheel, convenient to control the direction of the whole cart when moving.
5. Top finish: Electrostatic powder coating; Bed Frame: Cold-rolled steel tube.
6. Optional: whole X-ray exposing top, Stainless steel side rail and aluminum alloy side rail.
7. Accessories: I.V. Pole, Mattress